TIG WIRES (STAINLESS STEEL FILLER WIRES)

This austebtitic stainless steel filler wire rods with low carbon conformd to AWS SFA5, 9 ER 308L, 309L class, The weld metal is very good resistant to inter granular corrosion with free porosity and moltan pool, the content of weld metal is of controlled ferrite U.T.S. : 55-65Kg/mm2. Elongation: 30-40% Typical application in welding of AISI-ASTM 308, 304, 304L, 316, 316Ltype stainless steel plates, sheets, pipes, fabricating equipments for dairy, chemical and fertilizer industries, oil reiberies, specially used for root run. Sheild Gas: argaon +2% Oxigen.

ROYAL - 308 L (ER-308L)

Classification: IRS M-28-02 Class VI M1 & M2 Grade ER 308L AWS A5.9 ER 308L

Description
This wire rods with low carbon content confirms to AWS - SFA 5.9 ER 308L class. The weld metal is very good resistant to intergranular corrosion with free from porosity & moltan pool, and controlled ferrite.

Typical Applications: It is used for welding AISI, ASTM 308, 304, 304L type stainless steel plate, sheets, pipes, tubes etc. Fabricating equipments for dairy, chemical & fertilizer industries, oil refineries. Specially use for root run.

ROYAL - 309 L (ER-309L)

Description
This wire rods with low carbon content confirms to AWS - SFA 5.9 ER 309L class. The weld metal is free from porosity with good finish.

Typical Applications: Suitable for Welding of dissimilar steel combination such as AISI304 to carbon manganese steel and carbon steel used in fabrication barrier layer prior to surfacing & clad restoration specially used for root run.

ROYAL - 316 L (ER-316L)

Description
This is medium coated rutile type hard facing electrodes depositing on air hardening, weld metal is of approximately 600 BHN hardness. The weld metal resistant to severe abrasion and moderate impact, suitable for hardfacing applications like dredger bucket lips, plough, shares, excavator, conveyor buckets.

Typical Applications: Concrete mixer blades, excavator teeth plough shares, bucket lips, scraper blades, cement die, rings.